Cover
A cover follows the position of its entity (current_position, from 0 closed to 100 open): a roller shutter slides into its box, a roller shade rolls up, a curtain gathers to one side. A venetian blind also turns its slats with current_tilt_position.
- entity: cover.living_room type3d: cover object_id: <living_shutter> # the slats and the bottom bar cover: pane: Living_shutter_slats side: up| Option | Default | |
|---|---|---|
pane |
The object that goes away when the cover is open. | |
side |
up, down, left or right: the way it opens. |
|
motion |
slide |
slide, shrink or none (below). |
slats |
none | The object with the slats of a venetian blind. |
tilt_closed |
80 |
The angle of the slats at tilt 0, in degrees from the model. |
tilt_open |
0 |
The angle of the slats at tilt 100. |
![]() |
![]() |
|---|---|
| Closed (current_position: 0) | Open at 45% (current_position: 45) |
Motion
Section titled “Motion”slide: the pane slides towardside, and a plane hides what goes past the edge, into the box of the shutter.shrink: the pane gets shorter toward its side instead, as a roller shade rolls up or a curtain gathers to one side. No plane cuts the model, and the other objects of the cover (the bottom bar of a shade) follow the edge.none: the pane stays where it is and only the slats turn.
Venetian blinds
Section titled “Venetian blinds”slats names the object with the slats. They turn with current_tilt_position, each on its long side. They can be in one object with the rails and the cords, as Sweet Home 3D exports a blind: the card turns the pieces that are long and equal, at least three of them, and leaves the rest as it is. tilt_closed and tilt_open are the angles from the model at tilt 0 and at tilt 100, for slats drawn open; for a blind whose slats are horizontal at 50, tilt_closed: -80 and tilt_open: 80.
- entity: cover.living_room_shade type3d: cover object_id: Shade_* # the fabric and its bottom bar cover: pane: Shade_fabric side: up motion: shrink- entity: cover.office_blind type3d: cover object_id: Blind_office cover: side: up slats: Blind_office # the same object: slats, rails and cords

